TimberPro EB900 - Transportation; Storage; Recycling

You have to stop the engine when you transport the machine to a
different work area.
Stop the engine and let it cool down 5 minutes before moving it.
Only transport the machine when the engine is off and cooled down.
If you transport the leaf-blower by vehicle, secure it firmly so that it
can’t slide or move.
t in an ecological
disposed of along
lastic and metal
sified according to
Dispose of your equipment in an ecological manner.
Machines are not disposed of along with domestic
waste. Plastic and metal components should be
classified according to their nature and recycled.
ging the
discard the packaging
rd this
Materials used for packaging the machine are recyclable.
Please do not discard the packaging with domestic waste.
Discard this packaging in an official recycling center.
Stop the engine and let it cool down 5 minutes before you put the
machine away or transport.it. The exhaust pipe continues to be hot
after the engine stops. Never place the machine near flammable
material (dry grass, etc.) gas, or liquid fuel.
Make sure the machine stays out of the reach of children.
If it contains fuel, never put the machine inside a building where the
vapors may come in contact with a flame, a spark or a source of intense
heat.
When the machine has not been used for a long time, empty the fuel
tank and the carburetor, clean the pieces and put the machine in a
safe, dry place. Make sure the engine has cooled down.
17/109
12. INFORMATION ABOUT THE
DESTRUCTION AND RECYCLING OF
THE
EQUIPMENT
10. TRANSPORTATION
11.STORAGE
English
Dispose of your equipm
manner. Machines are n
domestic waste.
should be cl
aterials used for pac
recyclable. Please do n
with domestic waste. Di
12. INFORMATION ABOUT THE
DESTRUCTION AND RECYCLING OF
EQUIPMENT