TimberPro EB7600 - User Manual

109 pages

Save Page as PDF

To Next Page

EB7600

English / French / German

Italian / Dutch / Spanish

Impor tan t:

Read this instruction manual carefully before putting the Blower into operation and

strictly observe the safety regulations! Preserve instruction manual carefully!

Importante:

Lisez attentivement ce manuel utilisateur avant de mettre en route le souffleur et

respectez scrupuleusement les consignes de sécurité.

Conservez soigneusement ce manuel.

Wich tig:

Lesen Sie diese Betriebsanleitung sorgfältig durch bevor Sie das Blasgerät in Betrieb

nehmen und beachten Sie die Sicherheitsvorschriften genau!

Bewahren Sie diese Betriebsanleitung sorgfältig aul!

Importante:

Leggere con attenzion il manuale prima di mettere in funzione il soffiatore; le norme di

sicurezza vanno rigorosamente rispettate!

Conservare il manuale delle istruzioni per I’uso.

Belangrij k:

Lees altijd eerst de veilligheidsvoorschriften aandachtig door en neem deze in acht

voordat u de machine in gebruik neemt. Bewaar deze gebruiksaanwijzing zorgvuldig.

Importante:

Lea bien este manual antes de poner el soplador en funcionamiento,

y observe

estrictamente las medidas de seguridad. Conserve este manual de instrucciones.

Importante:

Leia este manual cuidadosamente antes de pôr o Soprador em funcionamento e

observe rigorosamente as normas de segurança.

Conserve cuidadosamente este manual de instruções.

INSTRUCTION MANUAL

INSTRUCTIONS D'EMPLOI

BETRIEBSANLEITUNG

ISTRUZIONI D'IMPIEGO

GEBRUIKSAANWIJZING

INSTRUCCIONES DE MANEJO

MANUAL DE INSTRUÇÕES

PETROL BLOWER

SOUFFLEUR A ESSENCE

BENZIN BLASGERÄT

SOFFIATORE A BENZINA

BENZINE BLADBLAZER

SOPLADOR GASOLINA

SOPRADOR A GASOLINA

4-Stroke

Main Page

Questions and Answers

S
Sonia AndersonAug 25, 2025
What to do if TimberPro Blower engine stops soon?
- S
  sdunnAug 25, 2025
  If your TimberPro Blower engine stops soon after starting, it might not be sufficiently warmed up, so perform a warm-up operation. Check that the choke lever is set to “OPEN” after the engine is warmed up. A clogged fuel filter or a contaminated air cleaner can also cause this issue; clean them. Also, ensure that the throttle wire is securely attached. For abnormal carburetor or drive system, request inspection and maintenance.
A
Amber HudsonNov 8, 2025
Why my TimberPro EB7600 Blower engine does not start?
- D
  David SanchezNov 8, 2025
  If the TimberPro Blower engine doesn't start, it could be due to several reasons. You may need to push the primer pump 7 to 10 times, or pull the starter rope more strongly. Ensure there is enough fuel in the blower. A clogged fuel filter or a broken fuel tube can also prevent starting; clean the filter or straighten the tube. Deteriorated fuel can make starting difficult, so replace it with fresh fuel (recommended every month). If there's excessive fuel suction, set the throttle lever to high speed and pull the starter handle. If it still won't start, remove the spark plug, dry the electrode, and reassemble. Also, make sure the plug cap is securely attached and the spark plug is clean with proper clearance, replacing it if needed. For abnormal carburetor, starter rope or drive system, req...