This will allow you to work better and more safely.
Perform a check-up each time you start the machine. Make sure
that the moving parts are idle and are not defective, that there are
no broken parts or other hazardous conditions that may affect the
operation of the machine.
Keep the handles clean and dry. Oily or greasy handles are slippery
and may cause loss of control of the machine. Stop the engine
before making any adjustments, changing accessories or storing the
machine.
2.7. SERVICE
Periodically have the machine serviced by a TIMBERPRO
authorized dealer, using original spare parts.
This will guarantee the safety of the machine.
6/109
To Next Page
Loading...
