Fingerscanner Technology for Time Attendance & Access Controller
13
Note: This option does not delete the user and data.
5.2 Logs
5.2.1 Arec Wrn, to warn admin when admin memory left as the number written
5.2.2 Urec Wrn, to warn user when user memory left is as the number written
5.2.3 ReVerify, to give user time delay between first entry and second entry (in
minute)
5.3 LockCtrl (Access Controller related options)
5.3.1 Time Setting, set the Period (time zone).
There are 50 Periods (time zone) available and each with setting hours and
days (Monday - Sunday). One zone per day.
5.3.2 Lock Register, set the user for access Group and Period (time zone).
! Every user who will use the door access should have Period (time zone) or
Grup set.
Regarding the Grup, is optional advance setting, may be implemented if
needed (please read below further instructions and functions).
5.3.3 Time Group Set, set the combination Periode (time zone).
This is the option to combine the Period (time zone) you have set, there are 5
Groups available.
The Group can be implemented to user (as mentioned above: 5.3.2 – Set
Group).
! Group 1, 2, 3 are functioning for Time Attendance and Door Access.
! Group 4 is functioning for open door and trigger the alarm.
If the user in Group 4 has opened and triggered the alarm, then it will need the
administrator to switch off the alarm.
! Group number 5 is functioning for record time. This group is intended for
security-patrol. User in Group 5 will need to combine with user in one or
combination of the Group 1, 2, 3 to access door.
5.3.4 Unlock Group, set the combination of Group, 10 groups available.
It is the function to combine existing Groups to access door. The combinations
are: 1, 2, 3, 12, 13, 15, 23, 25, 35, 123, 135, 125, 235, 1235.
To Next Page
Loading...