104
105
4TH CENTER HAND CALIBRATION
The 4th center hand is calibrated at the Timex factory to
reflect the standard minutes within the hour as defined
by Universal Time Coordinated. Globally a majority of
locations use the standard minutes. If the location you are
using for the 2nd and 3rd time zone uses the standard
minutes, the 4th center hand does not require recalibra-
tion. Only if you wish to have the second and third time
zones to reflect locations that do not follow the standard
minute, the instructions to recalibrate the 4th center hand
are as follows:
1. Pull the crown out to position 3. The 4th center hand
will point to 12 o’clock.
2. Rotate the crown to position the minute hand in the
correct position within the hour required for the loca-
tion you are wishing to use for the 2nd and 3rd time
zones.
3. Push the crown in to position 2. The 4th center hand
will point to its currently calibrated position of the
minutes within the hour.
4. Push button A to move the 4th center hand clockwise
until it aligns with the minute hand. Pressing and hold-
ing button A will make the hand move at a fast rate.
5. Pull the crown out to position 3. The 4th center hand
will point to 12 o’clock.
6. Rotate the crown to position hour and minute hands
to the correct time.
To Next Page
Loading...
Need help?
General
