6 7
NOTES:
• Setting the Time/Date manually on the watch
will automatically turn on the all-day activity
tracking function.
• When on Time of Day screen, press and hold
the Start/Split button to peek at the second
time zone.
SETTING THE TIME/DATE
1. From the Time of Day screen, press and hold the
Set/Recall button.
2. Push the Start/Split button to select first or
second time zone.
3. Push the Mode button, use the Start/Split and/or
Stop/Reset buttons to adjust the hours digits
(pay attention to the AM/PM designation).
4. Repeat Step 3 to adjust the minutes, seconds,
month, day, year, 12 or 24 hour and date formats.
5. Push the Set/Recall button when done to confirm
and exit or push the Start/Split button to change
to Time 2 settings.
QUICK VIEW OF ALL-DAY ACTIVITY DATA
Your all-day activity data is always easily accessible
from the Time of Day screen. Simply tap the Stop/
Reset button to scroll through the available data.
Steps>Distance>Calories Burned>Date
TRAINING WITH YOUR CLASSIC 50 MOVE+
While using the Chrono and/or Interval Workout
functions, your Classic 50 Move+ uses the built-in 3D
accelerometer to provide steps, distance and calorie
expenditure information.
1. From the Time of Day screen, push the Mode
button until you see CHRONO.
To Next Page
Loading...
Need help?
General