This clock radio features a dual alarm system, with two alarms that can be operated independently. The alarms can be
set to wake two people at different times, or to have a main alarm and a backup. One alarm features your choice of radio
stations as an alarm wake sound, while the second features a nature sound or buzzer as an alarm wake sound. You can
set the radio alarm, the nature sound/buzzer alarm, or both alarms.
S
e
tt
i
n
g
t
h
e
A
l
a
r
m
1
f
o
r
A
M
/
F
M
R
a
d
i
o
1. Press and hold the 2 Radio Alarm 1 Button. The display will flash and the Radio Alarm Indicator will appear. If
you do not begin setting the time within ten seconds of pressing the button, the display will stop flashing and you will
need to press the 2 Radio Alarm 1 Button again.
2.
While the display flashes, press the
1 Reverse and 6 Forward Buttons
to set the wake time. Hold a button for a few
seconds to set the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM Indicator.
3. After setting the radio alarm time, while the display is still flashing you will need to select the station. First, press the
L Mode/DST Button to select a radio frequency. Next, select a station using the
M
Memory Set 1-6 Buttons. For
more information on programming radio stations into memory, see the Programming Radio Station Settings section of
this manual. Rotate the
O
Volume Thumbwheel
to set the wake sound volume.
4. After setting the radio alarm wake time and sound, you will need to select the 7-5-2 setting. The 7-5-2 setting lets you
set the alarm for a full week, weekdays only, or the weekend. Before setting the alarm, be sure that the correct date
is set, as shown in the “Auto-Set” and Manual Time and Date Settings section of
the manual. While the display is still
flashing, press the
9 Date/7-5-2 Button
until the desired setting is shown.
5. After you have set the radio alarm wake time, sound, and 7-5-2 setting, press the 4 Enter Button. The Radio Alarm
Indicator will appear on the display, showing that the radio alarm has been set.
S
e
tt
i
n
g
A
l
a
r
m
2
f
o
r
N
a
t
u
r
e
S
o
und
s
/
B
u
zz
e
r
1. Press and hold the 7
N
a
t
u
r
e
S
o
und
s
/
B
u
zz
e
r
A
l
a
r
m
2
B
u
tt
o
n
until the Alarm 2 settings and
S
o
und
s
A
l
a
r
m
I
nd
i
ca
t
o
r
appear on the display.
2. Press the
1
R
e
v
e
r
s
e
or 6
F
o
r
w
a
r
d
B
u
tt
o
n
to set the Alarm 2 time.
3. Use the L
M
o
d
e
/
D
S
T
B
u
tt
o
n
to select a nature sound or the buzzer to wake to. There is a choice of five sounds:
S
o
und #1
:
O
c
e
a
n
S
u
r
f
S
o
und #2
:
B
i
r
d
s
S
o
und #3
:
B
r
oo
k
S
o
und #4
:
W
i
nd
C
h
i
m
e
s
bu
z
:
B
u
zz
e
r
4. See Note #4 in the Setting Alarm 1 section for instructions on setting the 7-5-2 alarm setting for Alarm 2.
5. After you have programmed the Alarm 2 settings, press the 4
E
n
t
e
r
B
u
tt
o
n
or wait ten seconds to return to the clock
display. The
S
o
und
s
A
l
a
r
m
I
nd
i
ca
t
o
r
will appear on the display, showing that the alarm is set.
8
O
p
e
r
a
t
i
n
g
t
h
e
D
u
a
l
A
l
a
r
m
S
y
s
t
e
m
To Next Page
Loading...
Need help?
General
