Why Tineco A10 HERO has weak suction power?
Weak suction power in your Tineco Vacuum Cleaner can be due to a couple of reasons: the dustbin and filters might be full of dust, so you should empty and clean them. Alternatively, the brush may be wrapped with hairs or fibers, so cleaning the brush is recommended.
General| Product | Product Technical Parameters |
|---|---|
| Dustbin Capacity | 0.4 L |
| Operating Voltage | 21.6 V |
| Rated Power | 350 W |
| Charge Time | <=5 hrs |
| Battery Model | A10 2000mAh 6INR 19/66 |
| Continuous Working Time | 25 min. (MAX mode: 7 min) |
| Adaptor | YLS0241A-T260080 |
| Input | 100-240V 50/60Hz 0.8A(MAX), 100-240V 50/60Hz 1.3A(MAX) |
| Dual Adaptor | TFDZ-18W07A2M |
Weight and Dimensions| Dimensions | 12.727.4030.24 in（ LWH） |
|---|---|
| Net Weight | 2.87 lb (main body) |
Steps for attaching the tube and motorized brush to the vacuum's main body.
Guidance on how to correctly install the dustbin and battery pack.
Instructions for starting the appliance, locking the switch, and adjusting power modes.
Procedures for emptying the dustbin and charging the battery pack.
Explanation of indicator lights and essential tips for battery care and usage.
Detailed steps for cleaning the dustbin and filters, including washing and air-drying.
Procedures for cleaning the HEPA filter and the vacuum brush roller.
Details on what the TINECO warranty covers and what is explicitly excluded.
Information on obtaining service, limitations, and legal rights.
To Next Page