EasyManuals Logo

Tineco FLOOR ONE S5 Series User Manual

Tineco FLOOR ONE S5 Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
EN
41
Dirty Water Tank
When dirty water reaches the Max line, the appliance will stop working and show a reminder on the
display and play a voice prompt.
Pull up the tank lid to empty the DWT. Use the cleaning tool to remove remaining debris. Rinse the
inside of the DWT and place back into the appliance.
Dirty Water Tank Lid
If the Dirty Water Tank lid and the lter inside have been blocked, remove the tank lid and the lter,
rinse both parts with water.
Dry Filter
Grasp recessed area on each side of the dry lter and pull upward. Rinse under running water and
must be completely dry before recombining with the lid of the DWT.
* A spare dry lter is provided with your appliance for convenient replacement.
click

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tineco FLOOR ONE S5 Series and is the answer not in the manual?

Tineco FLOOR ONE S5 Series Specifications

General IconGeneral
TypeCordless Wet/Dry Vacuum Cleaner
Battery LifeUp to 35 minutes
Self-CleaningYes
Charging Time4 hours
Smart DisplayYes
HEPA FiltrationYes
Weight4.5 kg
Smart Sensor TechnologyiLoop Smart Sensor
Water Tank Capacity0.8 L (depending on model)
Dirty Water Tank Capacity0.7 L (depending on model)
Battery Voltage21.6V (depending on model)

Related product manuals