Tineco FLOOR ONE S5 Series User Manual

EN
43
Brush Roller
Remove the brush roller by grabbing the brush
roller tab and pulling out.
Using the cleaning tool, remove the hair and
debris wrapped around the roller and rinse with
water. Replace the brush roller back into the
accessory holder, and allow it to dry completely
before reinstalling.
Remove hair and debris from the brush roller
chamber and the opening with a tissue or a
damp cloth.
Replace the brush roller by inserting the brush
roller end into the right side of the holder, then
attach the roller tab to the magnetic buckle on
the left side to lock into place.
Note:
A spare brush roller is provided with your appliance for convenient replacement.

Tineco FLOOR ONE S5 Series Specifications

General

Type	Cordless Wet/Dry Vacuum Cleaner
Battery Life	Up to 35 minutes
Self-Cleaning	Yes
Charging Time	4 hours
Smart Display	Yes
HEPA Filtration	Yes
Weight	4.5 kg
Smart Sensor Technology	iLoop Smart Sensor
Water Tank Capacity	0.8 L (depending on model)
Dirty Water Tank Capacity	0.7 L (depending on model)
Battery Voltage	21.6V (depending on model)