Tineco iFloor User Manual

10
EN
Charging Instructions
The indicator light will ash red when it’s power is low.
Please charge it.
1. Before charging the unit, please ensure that all water has
been removed from the clean and dirty water tanks and the
machine is dry.
2. To charge the unit, connect the external charger cord to the
unit and plug into the wall outlet.
3. To avoid being tripped accidentally, please put away the unit
on the storage tray near wall during charging.
Warning:
• Charge the unit only with the adaptor from Tineco.
• For optimal performance, the unit must be charged every 3 months. It may take 3-4 hours for a full
charge.
• Store appropriately indoors in a dry place. Do not expose machine to sunlight or freezing
temperature. Recommended temperature range: 39.2°F (4°C) ~ 104°F (40°C).

Tineco iFloor Specifications

General

Charging Input	100-240V
Voltage	22.2V 2500mAH Li-ion
Rated Power	120W
Running Time	22mins
Charging Time	3-4hrs
Water Flow Rate	Normal: about 40ml/min Spot: 220ml/min
CWT Capacity	17.92FL.OZ.(530ML)
DWT Capacity	13.53FL.OZ.(400ML)
Waterproof	IPX4