EasyManuals Logo

Tineco PURE ONE S15 Series User Manual

Tineco PURE ONE S15 Series
Go to English
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
EN
24
Off: WiFi is not connected,
please connect.
During Charging
Charging (Battery 0-99%)
Battery icon: solid green.
Battery indicator: blinking green.
Tineco indicator: blinking.
Fully charged (Battery 100%)
In 5 mins
Battery icon & Battery
indicator: solid green.
Tineco indicator: illuminated.
After 5 minutes: all indicator
lights turn off.
Battery icon blinking green:
No battery pack or battery
pack installed incorrectly.
Both blinking red: fault.
MAINTENANCE
Note:
Clean the dustbin and lters after each use.
To maintain high performance, wash and dry
the pre-lter monthly, replacing it every 6
months. Wash and dry the HEPA lter every 3
months, replacing it every 12 months.
Dustbin, Mesh Filter and
Pre-lter
1.Turn counter-clockwise to remove the lters.
Fig.E-1
2.Do not turn the appliance upside down when
removing or installing the lter to prevent dust
from entering the motor.
Fig.E-2
3.Clean the dustbin and mesh lter with a damp
cloth or the cleaning tool. Air dry completely
before reinstalling.
Fig.E-3
4.The pre-lter can be washed under cold
running water and must be completely dry
before reinstalling.
Fig.E-4
5.After cleaning, insert the pre-lter into the
mesh lter properly and it clicks into place.
Install the clean lters back into the main body,
then close the dustbin ap.
Fig.E-5
HEPA Filter
1.Pull out the HEPA lter (in magnetic design) for
cleaning. Do not use the appliance without rst
installing the HEPA lter.
Fig.E-6
2.The HEPA lter can be washed under cold
running water and must be completely dry
before reinstalling.
Fig.E-7
Dust Sensor
To avoid dust accumulation which can affect
cleaning performance, wipe the suction mouth
with a damp cloth.
Fig.E-8
Mini Power Brush
1.Press against the roller end cover downward.
Fig.E-9
2.Pull out the brush roller.
Fig.E-10
3.Remove the debris wrapped around the roller
with the Tineco Hair Cleaning Tool.
Fig.E-11
4.Fully reinsert the brush roller at an angle and
push upward until it clicks securely back into
place.
Fig.E-12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tineco PURE ONE S15 Series and is the answer not in the manual?

Tineco PURE ONE S15 Series Specifications

General IconGeneral
Battery LifeUp to 40 minutes
TypeCordless Stick Vacuum
Battery Voltage21.6 V
DisplayLED Display
Charging Time3-4 hours
Dustbin Capacity0.6 L
RuntimeUp to 40 minutes
FiltrationHEPA filtration
AccessoriesMini Power Brush, Crevice Tool
Weight5.5 lbs
Smart FeaturesiLoop™ Smart Sensor Technology

Related product manuals