Tineco S10 Series User Manual

EN
17
Pre-lter
Ensure the appliance is switched off before
cleaning, and remove the dirty pre-lter from
the mesh lter-holder.
Do not turn the appliance upside down when
removing or installing the lter to prevent dust
from entering the motor.
The pre-lter can be washed under cold running
water and must be completely dry before
reinstalling.
HEPA Filter
Press the HEPA release button and gently
remove for cleaning. Do not use the appliance
without rst installing the HEPA lter.
Do not place the appliance as above when
removing or installing the HEPA lter, to prevent
dust from entering the motor.
The HEPA lter can be washed under cold
running water and must be completely dry
before reinstalling.

Tineco S10 Series Specifications

General

Battery Type	Lithium-Ion
Type	Stick Vacuum
Run Time	Up to 40 minutes
Dustbin Capacity	0.6L
Filtration System	HEPA filtration
Motor	Digital motor
Accessories	Motorized floor brush, crevice tool, combination tool, charging dock
Charge Time	4 hours