6 REV. 00
Under Bluetooth mode, short press INFO to display Time/Date
Menu function
Under DAB mode, short press Menu/Enter to into Menu, press TUNE+/TUNE- to choose from Full san Manual Tune
DRS Prune System.
Full scan: short press Menu/Enter to start full range search.
Manual tune: short press Menu/Enter to start full range search.
DRC: short press Menu/Enter to select DRC: DRC off / DRC low / DRC high.
Prune: short press Menu/Enter to select Prune NO/YES.
Under FM mode, short press Menu/Enter to into Menu, press TUNE+/TUNE- to choose from Scan setting Audio
setting System.
Scan setting: short press Menu/Enter to select All stations / Strong stations only.
Audio setting: short press Menu/Enter to select Stereo Allowed / Forced Mono.
SYSTEM SETTING
Under System mode, short press Menu/Enter to into Menu, press TUNE+/TUNE- to choose from Tome Back Light
Language Factory Reset SW version.
Time setting
Auto synchronizes time with DAB or FM RDS.
The unit will synchronize time when receiving DAB or FM RDS signal.
Set time/date manually
When there is no signal to synchronize time with DAB or FM RDS,
1. Go to choose time menu
2. Then choose Set Time/Date, short press Menu/Enter to adjust HH-MM-DD-YY. Short press Menu/Enter again to
confirm after time setting finished, screen will display Time Saved. Then long press Menu/Enter to return.
Setting Auto Update Time
1. Go to choose time menu
2. Then choose Auto update, press Menu/Enter, press TUNE+/- to choose below modes
Update from any: synchronize with DAB or FM RDS
Update from DAB: synchronize with DAB only
Update from FM: synchronize with FM only
No Update: no synchronize.
Set 12/24 hour
1. Go to choose time menu
2. Then choose to set 12/24 hour, short press Menu/Enter, press TUNE+/- to select format of time display
Set 12 hour: 12 hour mode
Set 24 hour: 24 hour mode
Set Date format
1. Go to choose time menu
2. Then choose Set date format, short press Menu/Enter to into Menu, press TUNE+/- to choose
MM-DD-YYYY
To Next Page
Loading...
