Motz-Computer Copyright 2011
Service und Vertriebs GmbH
Pfennigbreite 20 - 22 Seite: 28
D-37671 Höxter
Germany
Set Printer
Lines per page
Please enter the number of lines per page you
want to print. Press enter to set up.
Setup Race
Move the selection bar the race you want to
print and press the ENTER key.
Here you have the possibility to setup what
numbers you want to register. If you don’t like
to have birds on your print outs which don’t
have been allocated than select the second item
in the submenu “Registration without el. No.”
This setup menu is especially for training races.
Registration of all electronic numbers
If you select this menu item your MC1100 clock will register all electronic numbers, whether they are
allocated or not. This function is only activated for training races. On official races not allocated birds
won’t be clocked. But those rings will be indicated by a different beep. That is a good possibility to
test you complete trap system with one not allocated electronic ring.
Training basketing
Available in HOME or SINGLE mode.
This function is for flight simulation.
The pigeon for the flight simulation can be selected at three different points
Printer 06. 18:06:21
-------------------------------------------
Registration
-------------------------------------------
Reg. with EL-No.
Reg. without EL-No.
Training
-------------------------------------------
Select via antenna
Select via alloc-list
Select all
Lines per page
___
To Next Page
Loading...
Need help?
General