Handset and Hand-free by pressing the corresponding keys.
Note: The
will flash during the Incoming interface
3.3.Mute
You can press the Mute key to make the user NOT be heard by the other party, but User
can hear the other party. Icon
will be shown on the LCD, and press the Mute key again to
recover.
3.4.Call Hold/Resume
1. Press the Hold button or Hold soft key to put User active call on hold.
2. If there is only one call on hold, press the hold soft key to retrieve the call.
3. If there is more than one call on hold, press the line button, and the Up/Down button to
highlight the call, and then press the Resume button to retrieve the call.
3.5.Do Not Disturbed (DND)
If you enable DND mode, the phone will reject to answer all calls automatically and play busy
tone, the UI will present missed calls at the same time.
3.6.Call Waiting
To configure Call Waiting via Phone interface:
1. Press Menu -->Features-->Call Waiting-->E nter, ;
2. Use the Left or Right key to activate or deactivate call waiting.
3. Then press the Save key to save the changes.
3.7.Call Forward
You can set the static forward to transfer all the incoming calls to specified number; Also you
To Next Page
Loading...