Is escape non Ascii character: To transfer the symbol to
Ascii character.
Missed Call Log: To display the miss call log.
To display or configure third-party MOH(music-on-h o ld )
server.
Active: To enable or disable this MOH server, If enabled,
the IP phone will play MOH from configured server.
Music Server Address: To configure MOH server address.
To display or configure session timer settings.
Active: To enable or disable this feature, If enable, the
ongoing call will be disconnected automatically once the
session expired unless it’s been refreshed by UAC or UAS.
Session Expire: Configure session expire time.
Session Refresher: To configure who should be response
for refreshing a session.
Note
: UAC means User Agent Client, here stands for IP phone.
UAS means User Agent Server, here stands for SIP server.
To display or configure Broadsoft AOC feature.
AOC: A feature used to be accounting on Broadsoft
platfo r m.
: Please consult your administrator further information.
To enable or disabled SRTP feature.
Voice Encryption(SRTP): If enabled, all audio signal
(technically speaking it’s RTP streams) will be encrypted
for more security.
To display NAT-related settings.
UDP Keep Alive message: If enabled, IP phone will send
alive message periodically to router to keep
NAT port alive.
UDP Alive Msg Interval: Keepalive message interval.
Rport: Remote Port, if enabled, it will add Remote Port
into outgoing SIP message for designated account.
5.4.Network->Basic
Path: Web UI->Network->Basic
To Next Page
Loading...