Note: Not all servers support voice message.
Voice Message
You can leave a message when the user who you call is busy or unavailable. Leave a message
according to the voice prompt of server, and then hang up after leaving the message.
Set Visit account number of voice message via phone interface.
1. In the Idle, press the Menu soft key：
2. In the Idle, press the Down key on the phone keyboard to select message, press the OK key
on the phone keyboard or the Enter soft key to enter the Message interface.
3. In the Message interface, press the Down key on the phone keyboard to select the voice
message, press the OK key on the phone keyboard or the Enter soft key to enter the Voice
Message interface.
4. Select the Voice Message Setting：
5. Press the OK key on the phone keyboard or the Enter soft key to set account 1, input the
Visit account number of voice message ( For example: *97), press 123 soft key to switch the
input methods:
6. Press the OK key on the phone keyboard or the Save soft key to save and return to message
interface.
Check voice message
1. Press the Message key or the Connect soft key to call the Visit account number of voice
message.
2. Check voice message according to voice prompt.
Set the Visit account number of voice message first before check voice message.
The LED light of Message will darken after all the voice messages checked.
3. Check voice message via phone interface
Access Menu-> Message->Voice Message-> New Message. The LCD displays new
messages and old messages of current account.
To Next Page
Loading...