Service
6
Service
Scope of delivery
Included in the packaging of your Ergophone 12 are:
Ergophone 12
Connection cables
Operating instructions
Setting up
Your Ergophone 12 has been manufactured for normal conditions of
use. Solvents in furniture lacquers, wood oils and paint preservatives
may corrode the device feet. Device feet altered in this way may then
leave stains on furniture.
Therefore always use a non-slip base, especially with new or recent-
ly treated furniture.
Connecting
You must attach all necessary cables before you can start using
your Ergophone 12.
1 Disconnect the existing telephone cable from the telephone
and insert the free connector into the "LINE" jack.
2 Insert the connection cable provided into the telephone with
one
connector and into the "TEL" jack with the other connector.
To Next Page
