TIPTEL IP 286 - Description of Configuration Parameters in CFG File; Appendix A

12
www.tiptel.nl
Tiptel b.v.
Camerastraat 2
1336 BC Almere
Tel: 036 53 666 50
Fax: 036 53 678 81
Appendix A
1. Description of configuration parameters in CFG file
Section Header and Path
Parameters
Permitted
Values
Descriptions
[ autop_mode ]
path = /config/Setting/autop.cfg
mode
0,1,4,5,6,7
It defines the value of Check New
Config.
0:Disabled
1:Power on
4:Repeatedly
5:Weekly
6:Power on + Repeatedly
7:Power on + Weekly
The default is 0.
schedule_min
1 to 43200
It is available when mode is 4 or 6.It
stands for the interval time (by
minutes) of checking new config.
schedule_dayofwee
k
0,1,2,3,4,5,
6 or a
combinatio
n of these
numbers
It is available when mode is 5 or 7.It
defines the day of week when there‟s
a need to check new config. If it is
set to be 0123456, it means every
day.
0:Sunday
1:Monday
2:Tuesday
3:Wednesday
4:Thursday
5:Friday
6:Saturday
schedule_time
Time as
19:45
It is available when mode is 5 or 7.It
means the phone will check new
config at a time between
schedule_time and
schedule_time_end on a specified
day every week.
schedule_time_end
Time as
19:45
[ PNP ]
path = /config/Setting/autop.cfg
Pnp
0 or 1
It defines the value of PNP config.
0 stands for Disabled.
1 stands for Enabled.
The default is 0.
[ cutom_option ]
path = /config/Setting/autop.cfg
cutom_option_code
0
Integer
from 129 to
254
It defines the Custom Option.
The default is blank.
cutom_option_type
0 or 1
It defines the Custom Option Type..