TIPTEL IP 286 - Configure the Expansion Module Via Auto Provision

35
www.tiptel.nl
Tiptel b.v.
Camerastraat 2
1336 BC Almere
Tel: 036 53 666 50
Fax: 036 53 678 81
i. Configure the Expansion Module via Auto Provision
Connect the expansion module to the phone.
Open the .CFG file which you want to use for provision, and edit it as below:
[key0]
Path= /config/vpPhone/Ext38_00000000000001.cfg
DKtype =
Line =
Value =
Type =
PickupValue =
[key1]
Path= /config/vpPhone/Ext38_00000000000001.cfg
DKtype =
Line =
Value =
Type =
PickupValue =
Note:
Ext38_00000000000001.cfg means the first expansion module. If you want to configure more than one expansion
module, it will be Ext38_00000000000002.cfg, Ext38_00000000000003.cfg [key0] means the first DSS key on
the expansion module, [key1] means the second DSS key ……
Write the relevant parameter on “DKtype =” “Line = ” “Value = ” “Type =” “PickupValue = ”. For details please see
the manual below.
type
blf or
bla
It is used when configuring a
DSS Key as BLF or Shared
Line.
blf stands for BLF.
bla stands for Shared Line.
No default value.
Line
Integer
from 0
to max
line
number
Seen from the web, it reflects the
value under Line title.
It defines the Line you are going
to use for a specific function (if
the function needs to specify a
line).
Normally,0 stands for Auto,1
stands for Line1 and so on.