Tiptel b.v.
Camerastraat 2
1336 BC Almere
Tel: 036 53 666 50
Fax: 036 53 678 81
[ AlertInfo0 ]
path = /config/Setting/Setting.cfg
It defines the first Internal Ringer
Text.
The default is blank.
It defines the ringer for the first
Internal Ringer Text. The ringer is
defined by its order number.
The default is 1.
[ AlertInfo1 ]
path = /config/Setting/Setting.cfg
They have same path and parameters as [ AlertInfo0 ] and share the same
Permitted Values and default values.
[ AlertInfo2 ]
path = /config/Setting/Setting.cfg
[ AlertInfo3 ]
path = /config/Setting/Setting.cfg
[ AlertInfo4 ]
path = /config/Setting/Setting.cfg
[ AlertInfo5 ]
path = /config/Setting/Setting.cfg
[ AlertInfo6 ]
path = /config/Setting/Setting.cfg
[ AlertInfo7 ]
path = /config/Setting/Setting.cfg
[ AlertInfo8 ]
path = /config/Setting/Setting.cfg
[ AlertInfo9 ]
path = /config/Setting/Setting.cfg
[ AlwaysFWD ]
path = /config/Features/Forward.cfg
It defines whether the Always
Forward is enabled.
0 stands for Disabled.
1 stands for Enabled.
The default is 0.
It defines the Target number that the
phone will Always Forward to.
The default is blank.
It defines the On Code for Always
Forward.
The default is blank.
It defines the Off Code for Always
Forward.
The default is blank.
[ BusyFWD ]
path = /config/Features/Forward.cfg
It defines whether the Busy Forward
is enabled.
0 stands for Disabled.
1 stands for Enabled.
The default is 0.
It defines the Target number that the