Tirol TK110 - Device Default Is 2 Pin; Notices

Device default is 2pin
1)red wire connect power positive+,
2)black wire connect power negative-,
3) Yellow wire connects to ACC
4) White wire connects to relay white wire
INDICATOR LIGHT
STATUS
MEANING
green light -Solid
GSM signal connection
green light -Flash
searching GSM signal
Blue light -Solid
GPS signal connection
Blue light -Flash
searching gps signal
Note: All led will turn off after 10 minutes for best hide.if you call the device sim
card number,so the led will turn on work again. Connect 12V-36 v voltage of the
power supply
3. Notices:
1. GPS tracking can be worked outdoor. Must have a mobile phone signal and have
GPS signal, can block GPS satellite signal when there are metal and building above
the GPS tracker
2.Please make sure GSM SIM card(2G GSM network or compatibility 2G GSM
network) supports making calls, sending messages, GPRS network.
3.Please make sure GSM SIM card is with sufficient balance.
4.Please make sure the GSM card has opened the call shows and turned off the call