Tirol TK110 - Over-speed Alarm Setting

Alarm information will be sent to your Mobile phone by SMS/ call and will be sent t
o the platform by gprs also
Command: admin123456+space+ phone number（This phone number is your own
mobile phone number , not the mobile number in tracker .）
Reply：admin ok
E.g：admin123456 13725556021
Note: support 5pcs admin number , Set the first authorization number,then use use
the first authorization number to set other authorization number,
If the authorization number forget or lost, you can send reset123456 to Restore the
factory Settings
Admin number Canceling:
Command ：noadmin123456 13725556021
Reply：noadmin ok
5.3. Over-speed Alarm setting（It works only in continuous positioning mode.）
Over-speed Alarm setting:
Command ：speed123456+space+ speed（Suppose speed is 70km/h）note: not less
60KM/H
Reply：speed ok
E.g：