34 of 90
Disconnecting the external power supply of the cabin
Press fastener 1 of plug 2. Pull plug 2 off from the cabin.
Connecting the power supply of the cabin (200 to 260 RS and 305 S only)
Attention
Check the lighting system prior to departure.
Lift the cover flap of the 13-pin socket and insert 13-pin plug 1. Turn plug 1 clockwise.
Aligning the cabin
Sideways: With the help of a second person, push against the side wall on the opposite side of the
cabin in order to move the cabin into the desired direction. The wooden guides on the cabin floor
support you in this effort.
Lengthwise: With the help of a second person, you can move the cabin forward by pushing against
the rear of the cabin.
To Next Page
Loading...