For an exact description of the operation, refer to the enclosed
operating instructions by Truma SecuMotion.
A quick-action stop valve 1 is installed for each of the appliances mentioned above. Depending on the
equipment option, quick-action stop valves 1 are either located in the kitchen block on the right side or
in the stowage space on the left side inside the cabin.
Quick-action stop valves 1 are open, if the red operating handle of quick-action stop valve 1 points
toward the outgoing line to the respective appliance. If the appliances are not used, quick-action stop
valves 1 must be closed.
To Next Page
Loading...