To Next PageTo Next Page
Need help?Do you have a question about the Titan 440i and is the answer not in the manual?
General| Max Operating Pressure | 3300 PSI |
|---|---|
| Type | Airless Paint Sprayer |
| Power Source | Electric |
| Max Tip Size | 0.023 inches |
| Max Delivery | 0.54 GPM |
Steps to prepare the sprayer before operation.
Procedure to clean new sprayers before first use.
Steps to ensure the fluid is compatible with the paint.
Guidelines for painting with the sprayer.
Techniques for achieving professional painting results.
Recommended steps for practicing spray patterns.
Instructions for thoroughly cleaning the sprayer after use.
General guidance and tools for repairs and servicing.
Step-by-step guide to replace the motor unit.
Instructions for replacing worn motor brushes.
Steps for replacing gears within the pump housing.
Guide for replacing the electronic pressure transducer.
Instructions for replacing the PRIME/SPRAY valve assembly.
Procedures to service valves and repack the fluid section.
Instructions for cleaning, reversing, or replacing valve seats.
Guide for replacing internal packings in the fluid section.
Steps to replace the filter in the pump housing.
Guide for replacing the filter in the spray gun.
Instructions for assembling the sprayer's stand.
Instructions for assembling the suction set.
Guidance on selecting the correct spray tip orifice and fan width.
