EasyManua.ls Logo

Titan Performance Series 450e User Manual

Titan Performance Series 450e
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Edition 7 / 2013 0558 940G
Performance Series 450e
Performance Series 450e
Airless high-pressure spraying unit
Airless Equipo de alta presión para pulverizar
Models:
0558067
0558073
E
GB
Operating manual
Instrucciones de uso........... p. 20
Question and Answer IconNeed help?

Do you have a question about the Titan Performance Series 450e and is the answer not in the manual?

Titan Performance Series 450e Specifications

General IconGeneral
TypeAirless Paint Sprayer
Spray PatternAdjustable
Max Pressure3000 PSI
Horsepower0.60 HP
Power SourceElectric
Voltage120V
Maximum Tip Size0.021 inches
Spray Tip Size0.015"
Amperage12 A
Hose Length50 ft

Summary

Safety Regulations for Airless Spraying

Injection Injury Hazard

Potential for serious injury or amputation from high-pressure spray stream.

Explosion or Fire Hazard

Risk of explosion or ignition from solvent/paint fumes.

Explosion Hazard Due to Incompatible Materials

Using incompatible materials can cause severe injury or property damage.

Hazardous Vapors

Harmful if inhaled; can cause nausea, fainting, or poisoning.

General Hazard

Product can cause severe injury or property damage.

Earthing Instructions

Ensures safety by providing an escape wire for electric current.

Description of Unit

Starting Operation

High-Pressure Hose, Spray Gun, and Separating Oil

Connecting hoses and gun, and mentions separating oil.

Connection to the Mains Network

Ensures connection to an appropriately-grounded safety outlet.

Spraying Technique

Cleaning the Unit (Shutting Down)

Remedy in Case of Faults

Unit Does Not Start

Possible causes and measures for when the unit fails to start.

Unit Does Not Draw In Material

Possible causes and measures for material intake issues.

Unit Draws In Material, Pressure Does Not Build Up

Troubleshooting pressure build-up problems.

Coating Material Exits at Top of Fluid Section

Possible causes for leaks from the fluid section.

Increased Pulsation at the Spray Gun

Addressing issues with spray gun pulsation.

Poor Spray Pattern

Solutions for achieving an even spray pattern.

Unit Loses Power

Troubleshooting steps for loss of unit power.

Servicing

Repairs at the Unit

Appendix

Related product manuals