Titan Performance Series 450e User Manual

Performance Series 450e 19
GB
Accessories Appendix
12. Accessories for Performance Series 450e
Airless Tip Selection
Tipsareselectedbytheoricesizeandfanwidth.Theproper
selectionisdeterminedbythefanwidthrequiredforaspecic
jobandbytheoricesizethatwillsupplythedesiredamountof
uidandaccomplishproperatomization.
Forlightviscosityuids,smalleroricetipsgenerallyaredesired.
Forheavierviscositymaterials,largeroricetipsarepreferred.
Please refer to the chart below.
i
Do not exceed the sprayer’s recommended tip
size.
Thefollowingchartindicatesthemostcommonsizesandthe
appropriate materials to be sprayed.
Tip Size Spray Material Filter Type
.011 – .013 Lacquers and stains 100 mesh filter
.015 – .019 Oil and latex 60 mesh filter
.021 – .026 Heavy bodied latex and blockfillers 30 mesh filter
Fanwidthsmeasuring8”to12”(20to30cm)arepreferred
because they offer more control while spraying and are less likely
to plug.
Liquid Shield Plus
Cleans and protects spray systems against
rust,corrosionandprematurewear.Nowwith
-25ºanti-freezeprotection.
Part # Description
  314-483 4ounce(112ml)bottle
314-482 1 liter bottle
Piston Lube
Specially formulated to prevent materials from
adhering to the piston rod, which becomes
abrasive to the upper seals. Piston Lube will
break down any material that may accumulate
in the oil cup and keep it from drying.
Part # Description
  314-481 4ounce(112ml)bottle
  314-480 8ounce(240ml)bottle
Miscellaneous
Part # Description
  490-012 HoseCoupling,1/4”x1/4”
730-397 High Pressure Fl. Gauge
314-171 Lubriplate, 14 ounce individual
314-172 Lubriplate, 6 lb. can
13. Appendix
13.1 Selection of tip
To achieve faultless and rational working, the selection of the tip is of the greatest importance.
In many cases the correct tip can only be determined by means of a spraying test.
Some rules for this:
The spray jet must be even.
If streaks appear in the spray jet the spraying pressure is either too low or the viscosity of the coating material to high.
Remedy:Increasepressureordilutecoatingmaterial.Eachpumpconveysacertainquantityinproportiontothesizeofthetip:
The following principle is valid: large tip = low pressure
small tip = high pressure
There is a large range of tips with various spraying angles.
13.2 Servicing and cleaning of Airless hard-metal tips
Standard tips
Ifadifferenttiptypehasbeentted,thencleanitaccordingtomanufacturer’sinstructions.
The tip has a bore processed with the greatest precision. Careful handling is necessary to achieve long durability. Do not forget the fact
thatthehard-metalinsertisbrittle!Neverthrowthetiporhandlewithsharpmetalobjects.
The following points must be observed to keep the tip clean and ready for use:
 1. Turnthereliefvalvehandlefullycounterclockwise(kCirculation).
2. Switch off the gasoline engine.
3. Dismount the tip from the spray gun.
4. Place tip in an appropriate cleaning agent until all coating material residue is dissolved.
5. If there is pressure air, blow out tip.
 6. Removeanyresiduebymeansofasharpwoodenrod(toothpick).
7. Check the tip with the help of a magnifying glass and, if necessary, repeat points 4 to 6.

Titan Performance Series 450e Specifications

General

Brand	Titan
Model	Performance Series 450e
Category	Paint Sprayer
Language	English