Do you have a question about the Titan Performance Series and is the answer not in the manual?
Brand | Titan |
---|---|
Model | Performance Series |
Category | Paint Sprayer |
Language | English |
Warns about injection hazards from high-pressure spray.
Lists points to observe before operating the unit.
Outlines rules for unit cleaning and maintenance during work breaks.
Explains symbols used in the manual to indicate hazards.
Details risks associated with high-pressure hoses and prevention.
Describes risks of explosion and fire from solvents and fumes.
Covers other hazards like solvent vapors and general risks.
Discusses electrical safety precautions and risks.
Explains risks of static electricity, sparks, and flames.
Describes the unit's intended use and typical applications.
Lists processible coating materials and viscosity limits.
Explains the Airless spraying method and its advantages.
Details how the electrically driven unit operates internally.
Lists numbered parts for the unit's diagram.
Visual representation of the unit with numbered components.
Lists specifications like voltage, pressure, flow rate, and dimensions.
Provides guidance on transporting the unit safely in a vehicle.
Details connecting the high-pressure hose, spray gun, and adding Piston Lube.
Explains the meaning of indicator lights on the control panel.
Describes settings for minimum pressure, no pressure, and cleaning.
Outlines requirements for connecting the unit to a grounded safety outlet.
Steps for flushing the unit with cleaning agent before first use.
Guides on preparing and starting operation with coating material.
Details on maintaining consistent distance, speed, and overlap for even spray patterns.
Emphasizes safe handling, avoiding damage, and recommended replacement intervals.
Steps to safely stop the unit during work interruptions.
Instructions for cleaning the unit after use to prevent material drying.
How to clean the exterior of the unit safely.
Procedures for cleaning or replacing the suction filter.
Steps for cleaning the high-pressure filter cartridge.
Instructions for cleaning the Airless spray gun and its intake filter.
Addresses issues when the unit fails to power on.
Troubleshoots problems with material intake.
Diagnoses causes for low or no pressure build-up.
Identifies issues with leaks at the fluid section.
Addresses excessive pulsation felt at the spray gun.
Solutions for uneven or poor spray patterns.
Diagnoses reasons for the unit losing operational power.
Outlines annual servicing recommendations by Titan service.
Details visual inspection of the high-pressure hose.
Step-by-step instructions for repairing the relief valve.
Procedures for disassembling and assembling inlet/outlet valves.
Guides on replacing packings in the pump manifold.
Steps to remove and replace the unit's motor assembly.
Procedures for inspecting and replacing gears in the pump housing.
Instructions for replacing the transducer assembly.
Electrical schematic showing unit connections and components.
Advice on choosing the correct spray tip for various applications.
Procedures for maintaining Airless hard-metal spray tips.
Lists available accessories for spray guns, like tip extensions.
Comprehensive table of tips, spray angles, bore sizes, and order numbers.
Details on Titan's TR² changeable nozzle tips.
Lists other compatible accessories for the 560e model.
Visual breakdown of the main assembly with numbered parts.
Lists part numbers and descriptions for the main assembly.
Visual breakdown of the fluid section with numbered parts.
Lists part numbers and descriptions for the fluid section.
Visual breakdown of the drive assembly with numbered parts.
Lists part numbers and descriptions for the drive assembly.
Visual breakdown of the stand with numbered parts.
Lists part numbers and descriptions for the unit's stand.
Visual breakdown of the suction system with numbered parts.
Lists part numbers and descriptions for the suction system.
Details warranty coverage, exclusions, and claims process for the original purchaser.
Guidance on recycling electronic waste according to EU directives.