To Next PageTo Next Page
Need help?Do you have a question about the Titan 330 and is the answer not in the manual?
General| Brand | Titan |
|---|---|
| Model | 330 |
| Category | Paint Sprayer |
| Language | English |
Important medical information regarding injection injuries from high-pressure fluid. Timely treatment is crucial.
Warnings and prevention measures for flammable vapors and ignition sources during spraying.
Procedure for connecting the sprayer and preparing it for initial use.
Steps to flush out test fluid from a new sprayer before operation.
Instructions for flushing the system with solvent compatible with the paint.
Guidelines for holding the gun, stroke action, and achieving proper coverage.
Steps for testing the spray pattern and adjusting pressure.
Tools required and general advice before performing maintenance or repairs.
Lists common pump issues like motor not running or insufficient flow, with causes and solutions.
Addresses gun issues like spitting, not shutting off, or not spraying, with causes and solutions.
Covers common problems like tails, heavy centers, distortion, and surge, with causes and solutions.
Guide to selecting spray tips based on orifice size, fan width, and material viscosity.
Information on lubricant for the piston rod to prevent wear and drying.
