Titan 340 - User Manual

Questions and Answers

C
Carl ProctorJul 27, 2025
What to do if my Titan 340 Paint Sprayer will not run?
- C
  cfrankJul 27, 2025
  If your Titan Paint Sprayer isn't running, there are several possible causes: * It might not be plugged in. Ensure the unit is properly plugged in. * The breaker may have tripped. Try resetting the breaker. * The pressure might be set too low. Turn the pressure control knob clockwise to increase the pressure setting. * There may be faulty or loose wiring. In this case, it is best to have it inspected by a Titan authorized service center.
B
brady07Aug 4, 2025
Why Titan Paint Sprayer unit lacks power?
- M
  Mason FloresAug 4, 2025
  If your Titan Paint Sprayer lacks power, it could be due to: * The pressure control knob not being set properly. Turn the pressure control knob clockwise to increase the pressure setting. * Improper voltage supply. Ensure the input voltage is correctly connected to the unit.
R
robertsjosephAug 11, 2025
How to fix poor spray pattern with Titan Paint Sprayer?
- G
  ghughesAug 11, 2025
  A poor spray pattern from your Titan Paint Sprayer can be caused by: * A worn or oversized spray tip. Replace the spray tip with a new or smaller one, following the instructions that came with the spray gun. * Insufficient fluid delivery. Add solvent to the material as per the manufacturer's recommendations. * Incorrect pressure setting. Adjust the pressure by rotating the pressure control knob until you achieve a proper spray pattern.
K
Krista WelchAug 19, 2025
What to do if there is excessive surge at the spray gun of Titan 340?
- E
  Elizabeth CombsAug 19, 2025
  Excessive surge at the spray gun of your Titan Paint Sprayer could be due to using the wrong type of airless spray hose. Replace the hose with a minimum of 15m (50’) x 10mm (1/4”) grounded textile braid airless paint spray hose.