EasyManua.ls Logo

Titan RX-Pro User Manual

Titan RX-Pro
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DK S
E I
D F
GB
P NL
DK S
E I
D F
GB
P NL
RX-Pro
Airless Spray Gun
English .................................... p. 2
Deutsch................................. p. 10
Français ................................ p. 18
Español ................................. p. 26
Italiano ................................. p. 34
Português ............................. p. 42
Nederlands ........................... b. 50
Dansk ..................................... s. 58
Svenska .................................s. 66
Owner’s Manual • Betriebsanleitung
Mode d’emploi • Instrucciones de uso
Instruzione per l’uso • Manual de proprietário
Gebruiksaanwijzing • Driftsvejledning
Bruksanvisning
0416 • Form No. 0538801B
Question and Answer IconNeed help?

Do you have a question about the Titan RX-Pro and is the answer not in the manual?

Titan RX-Pro Specifications

General IconGeneral
BrandTitan
ModelRX-Pro
CategoryPaint Sprayer
LanguageEnglish

Summary

Safety Precautions

Injection Injury Hazard

High-pressure stream can pierce skin, leading to serious injury or amputation.

Explosion Hazard from Incompatible Materials

Risk of severe injury or property damage due to incompatible materials.

General Safety Precautions

Product can cause severe injury or property damage; follow all instructions and precautions.

Explosion Protection Identification

X Marking

Identifies equipment suitable for explosion-hazardous areas (Zone 1) and related requirements.

Residual Risks

Technical Data

Introduction and Setup

Using the Gun Trigger Lock

Instructions on how to lock and unlock the gun's trigger for safety.

Setup Procedure

Steps for setting up the airless spray gun, including hose attachment and system preparation.

Operation and Tip Maintenance

Spray Gun Operation

Guidelines for operating the spray gun, including tip orientation and pressure adjustment.

Clearing a Clogged Tip

Procedure to clear a clogged spray tip by rotating and triggering the gun.

Changing a Tip

Instructions on how to remove and replace spray tips and seals.

Identifying Tip Sizes

Formula to identify tip sizes based on spray pattern and orifice diameter.

Cleanup and Maintenance

Cleanup Procedures

Guidelines for cleaning the spray gun after use, including special instructions for flammable solvents.

Maintenance and Seal Assembly

Steps for performing maintenance, including replacing the seal assembly.

Filter Replacement and Reversing Diffuser

Reversing the Diffuser Seat

Procedure to reverse the diffuser seat for maintenance.

Replacing/Removing the Filter

Steps to clean or replace the gun filter.

Filter Chart

Details on different filter types, applications, and colors.

Parts List

Warranty Information

Related product manuals