EasyManuals Logo

Titan Performance Series 450e User Manual

Titan Performance Series 450e
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Performance Series 450e 5
GB
Safety regulations General view of application
HAZARD: EXPLOSION HAZARD DUE TO
INCOMPATIBLE MATERIALS
Will cause severe injury or property damage.
PREVENTION:
• Donotusematerialscontainingbleachorchlorine.
• Donotusehalogenatedhydrocarbonsolventssuch
as methylene chloride and 1,1,1 - trichloroethane.
They are not compatible with aluminum and may
causeanexplosion.Ifyouareunsureofamaterial’s
compatibilitywithaluminum,contactyourcoating’s
supplier.
HAZARD: GENERAL
This product can cause severe injury or property
damage.
PREVENTION:
• Readallinstructionsandsafetyprecautionsbefore
operating equipment.
• Followallappropriatelocal,state,andnationalcodes
governingventilation,reprevention,andoperation.
• Pullingthetriggercausesarecoilforcetothehand
that is holding the spray gun. The recoil force of the
spray gun is particularly powerful when the tip has
been removed and a high pressure has been set on
the airless pump. When cleaning without a spray tip,
set the pressure control knob to the lowest pressure.
• Useonlymanufacturerauthorizedparts.User
assumes all risks and liabilities when using parts that
donotmeettheminimumspecicationsandsafety
devices of the pump manufacturer.
• Beforeeachuse,checkallhosesforcuts,leaks,
abrasion or bulging of cover. Check for damage or
movement of couplings. Immediately replace the hose
ifanyoftheseconditionsexist.Neverrepairapaint
hose. Replace it with another earthed high-pressure
hose.
• Makesurepowercord,airhoseandsprayhosesare
routedinsuchamannertominimizeslip,tripandfall
hazard.
• Cleanupallmaterialandsolventspillsimmediatelyto
preventsliphazard.
• ALWAYSfollowthematerialmanufacturer’s
instructions for safe handling of paint and solvents.
• Donotusethisunitinworkshopsthatarecovered
under the explosion prevention regulations.
• Alwaysunplugcordfromoutletbeforeworkingon
equipment(electricunitsonly).
• Alwayskeepthepowercordpluginsightduringusage
to prevent any accidental shutdown or startup.
• Wearearprotection.Thisunitcanproducenoise
levelsabove85dB(A).
• Neverleavethisequipmentunattended.Keepaway
from children or anyone not familiar with the operation
of airless equipment.
• Donotmoveunitwhileunitisrunning.
• Donotsprayonwindydays.
HAZARD: HAZARDOUS VAPORS
Paints, solvents, insecticides, and other materials
can be harmful if inhaled or come in contact with
body. Vapors can cause severe nausea, fainting, or
poisoning.
PREVENTION:
• Usearespiratorormaskifvaporscanbeinhaled.
Read all instructions supplied with the mask to be sure
it will provide the necessary protection.
• Wearprotectiveeyewear.
• Wearprotectiveclothingasrequiredbycoating
manufacturer.
1.1 Earthing Instructions
PE
Electric models must be earthed. In the event of an
electrical short circuit, earthing reduces the risk of electric
shock by providing an escape wire for the electric current.
This product is equipped with a cord having an earthing
wire with an appropriate earthing plug. The plug must be
plugged into an outlet that is properly installed and earthed
in accordance with all local codes and ordinances.
DANGER — Improper installation of the earthing plug
can result in a risk of electric shock. If repair or
replacement of the cord or plug is necessary, do not
connect the green earthing wire to either blade
terminal. The wire with insulation having a green outer
surface with or without yellow stripes is the earthing
wire and must be connected to the earthing pin.
Checkwithaqualiedelectricianorservicemaniftheearthing
instructions are not completely understood, or if you are in doubt as to
whether the product is properly earthed. Do not modify the plug provided.
Iftheplugwillnotttheoutlet,havetheproperoutletinstalledbya
qualiedelectrician.
Caution – The power cord for this equipment acts as an
emergency stop/emergency switching off device. The
power cord must be placed near an easily accessible,
unobstructed socket-outlet.
Work or repairs at the electrical equipment:
Thesemayonlybecarriedoutbyaskilledelectrician.Noliabilityis
assumed for incorrect installation.
A list of the materials used in the construction of the equipment will be
made available on request to validate compatibility with the coating
materials to be used.
Operating Temperature
This equipment will operate correctly in its intended ambient, at a
minimumbetween+10°Cand+40°C.
Relative Humidity
The equipment will operate correctly within an environment at 50% RH,
+40°C.HigherRHmaybeallowedatlowertemperatures.
Measures shall be taken by the Purchaser to avoid the harmful effects of
occasional condensation.
Altitude
This equipment will operate correctly up to 2100m above mean sea level.
Transportation and Storage
This equipment will withstand, or has been protected against,
transportationandstoragetemperaturesof-25°Cto+55°Candforshort
periodsupto+70°C.
It has been packaged to prevent damage from the effects of normal
humidity, vibration and shock.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Titan Performance Series 450e and is the answer not in the manual?

Titan Performance Series 450e Specifications

General IconGeneral
BrandTitan
ModelPerformance Series 450e
CategoryPaint Sprayer
LanguageEnglish

Related product manuals