How to clean the inlet filter on a Titan Paint Sprayer when the spray pattern is distorted?
If the Titan Paint Sprayer's spray pattern becomes distorted or stops spraying while triggered due to a clogged inlet filter, remove the inlet filter from the suction tube. Clean the filter screen using warm, soapy water for latex materials, or mineral spirits for oil-based materials. Then, snap the inlet filter back into place.
General| Brand | Titan |
|---|---|
| Model | ControlMax 1700 Pro |
| Category | Paint Sprayer |
| Language | English |
Explains hazard symbols and their meanings for safe operation.
Details how to properly ground the electrical system for safety.
Discusses risks of explosion/fire from fumes and static electricity.
Warns about high-pressure paint streams piercing skin, causing serious injury.
Highlights built-in safety features of the sprayer.
Provides guidance on using extension cords and electrical safety.
Explains how to engage and disengage the spray gun trigger lock.
Details the steps to safely relieve system pressure.
To Next Page
