Rated voltage: 230-240V~ 50Hz
Rated power: 2000W
No-load speed: 7600/min
Guide bar length: 405mm
Max. cutting length: 400mm
Chain pitch: 9.525mm (3/8'')
Number of chain links: 57
Chain gauge: 1.27mm (0.05'')
Saw chain type: Oregon 91PJ057X
Bar type: Oregon 549756
Net weight: 5.8kg
Oil tank capacity: 100ml
cable length: 3M
TECHNICAL DATA
NOISE DATA
ACCESSORIES
Spanner 1PC
Measured sound pressure level: 84.53 dB (A) K=3 dB (A)
Measured sound power level: 104.53 dB (A) K=3 dB (A)
Guaranteed sound power level: 109 dB (A)
Vibration level: 6.940 m/ s
2
Uncertainty K: 1.5 m / s
2
The declared vibration value has been measured in accordance with a standard test method
and may be used for comparing one tool with another. The declared vibration value may also be
used in a preliminary assessment of exposure.
WARNING! The vibration emission value during actual use of the tool can differ from the
declared value depending on the ways in which the tool is used. Identify safety measures to
protect the operator that are based on an estimation of exposure in the actual conditions of use
(taking account of all parts of the operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time).
WARNING! Due to the power input of this product on start up, voltage drops may occur and
this can influence other equipment (e.g. dimming lights). So for technical reasons we advise, if
the mains-impedance is Zmax < 0.39 Ohm, these disturbance are not expected, If you require
future clarification, you may contact your local power supply authority.
The sound intensity level for the operator may exceed 85dB(A) and ear protection measures are
necessary.
To Next Page
Loading...
Need help?
General
