Titan TTB960STP - Page 25

EN
25
EN
In more detail...
TTB960STP by TITAN
Functions & Settings
Intended use
This cordless stapler TTB960STP is designated with a rated voltage of
3.6 V .
The product is intended for stapling fabrics, leather, cardboard, foils, insulation
material and similar materials to a soft surface, such as wood or wood-like
materials. The product is not suitable for fastening wall or ceiling panelling.
Do not use the product for any other purpose.
For safety reasons it is essential to read the entire instruction manual before rst
operation and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial
trade use. It must not be used for any purposes other than those described.
Switching on/off
1. Switch the product on by pressing
the on/off switch (11) at “I” marking
(Fig. 6).
2. Switch the product off by pressing the
on/off switch (11) at “O” marking.
11
Fig. 6
Check window and reload indicator
The user can check the lling status of
the staples from either of the two check
windows (14) (Fig. 7).
B
C
A
14
Fig. 7
MNL_3.6 V Cordless 12mm Stapler_V2_230628.indd 25 6/28/23 5:43 PM