Titan TTBPP52 - Technical Specifications

14
TTBPP52
Getting Started . . .
Your machine / Technical specications
1. Harness
2. Back plate (with handle and padding)
3. Volute case
4. Elbow
5. Flexible hose
6. Control handle
7. Setting/Stop lever
8. Throttle trigger
9. Extension tube
10. Blower tube
11. Nozzle
12. Control handle holder
13. Throttle cable
14. Cable retainer
15. Guard net
16. Spark plug connector
17. Front case
18. Mufer
19. Recoil starter handle
20. Primer
21. Air lter case
22. Choke lever
23. Fuel tank
24. Fuel tank cap
25. Multi-tool
26. Screwdriver
27. Torx key
28. Fuel mixing container
29. Thumb screw
30. Hex keyHex key
31. Cable tie, x2Cable tie, x2
Technical specications
General
> Dimensions (without hoses or tubes): approx. 47 x 37 x 46 cm
> Weight: approx. 9.5 kg
> Fuel tank capacity: 1300 cm
3
(ml)
> Petrol type: #XXXX or higher, unleaded
> Engine oil type:
2-stroke engine oil for air-cooled
engines, high quality
> Fuel-oil ratio: 40:1
> Specic fuel consumption at maximum
engine power:
420 g/kWh
> Fuel consumption at maximum engine
power:
0.66 kg/h
Engine
> Engine model: 1E44F-7
> Engine type: Air cooled, 2-stroke engine
> Engine displacement:
51.7 cm
3
> Maximum engine power: 1.6 kW
> Maximum operating engine speed: 7000 min
-1
> Maximum air velocity: 414 km/h
> Spark plug type: RCJ7Y/ L7RTC/ L8RTF/ BPMR7A
> Spark plug gap: 0.6-0.7 mm0.6-0.7 mm