What to do if Titan TTBPP52 engine does not reach maximum speed?
If your Titan Blower's engine isn't reaching its maximum speed, the air filter might be soiled, so you should clean it. Another potential cause is using the incorrect fuel or fuel mixture; if this is the case, stop the engine, empty the tank, and refill it with the correct fuel-to-oil mixture (40:1). It is also possible that the carburetor setting is not correct.
Why Titan TTBPP52 has excessive vibration?
Excessive vibration in your Titan Blower can stem from a few issues. One potential cause is using an incorrect fuel or fuel mixture; if so, stop the engine and replace the fuel with the correct mixture. Another reason might be loose fasteners on the machine, in which case you should stop the engine and re-tighten them. Broken anti-vibration dampers could also be the cause.
Why Titan TTBPP52 Blower produces excess smoke?
If your Titan Blower is emitting excessive smoke, the most likely cause is an incorrect fuel or fuel mixture. To resolve this, stop the engine, empty the fuel tank, and refill it with the correct fuel mixture.
What to do if Titan Blower has poor blowing performance?
If your Titan Blower's blowing performance is poor, check for blockages in the tubes or hoses and remove them. Also, clear the guard net regularly of leaves, dirt, and any foreign objects.
Why Titan TTBPP52 Blower engine does not start?
Several factors can prevent your Titan Blower's engine from starting. It could be due to an empty fuel tank, so ensure you fill it. Also, check if the stop lever is in the STOP position; if so, move it to the idle position and follow the engine starting procedure. An incorrect starting procedure, a loose or dirty spark plug connector, a wet or soiled spark plug, a dirty muffler, excess fuel in the combustion chamber, too large gap between electrodes, or incorrect fuel mixture could also be the cause. Make sure to attach the spark plug firmly, dry or clean the spark plug, clean the spark arrestor screen on the muffler, adjust the choke lever, clean or replace the spark plug, press the primer 7 times and restart, set gap between electrodes between 0.6-0.7 mm, or empty the tank and refill wit...
Essential safety advice, warnings, and precautions for operating the machine.
Procedures for fuel handling, storage, transport, emergency, and risk reduction.
Explanation of symbols, abbreviations, and signal words for hazard communication.
Identification of machine parts and detailed technical specifications.
Measured sound and vibration emission levels for the machine.
Instructions for unpacking, checking contents, and assembling the machine.
Procedures for preparing and filling the fuel-oil mixture correctly.
A simplified guide for starting the engine and beginning operation.
Guidance on harness use, starting/stopping, and blowing techniques.
Step-by-step instructions for engine operation and post-use procedures.
Key maintenance tasks, schedules, and procedures for components like spark plug and air filter.
Guidelines for storing the machine long-term and preparing for transport.
Guide to diagnosing and resolving common engine and performance issues.
Information on responsible recycling and disposal of old equipment.
Details of the product guarantee and terms of coverage.
Statements confirming compliance with UK and EU regulations.
To Next Page
General