Titan TTCSP49 - Page 47

47
TTCSP49
In more detail . . .
Nose
sprocket
clean every 10 hours of operation or whenever necessary
lubricate every 10 hours of operation or whenever necessary
Clutch
housing
lubricate every 25 hours of operation or whenever necessary
Chain
catcher
check X
replace whenever necessary
Fasteners
check and
tighten
every 25 hours of operation or whenever necessary
Air lter
check X
clean every 10 hours of operation or whenever necessary
replace whenever necessary
Drive
sprocket
check X
replace every 25 hours of operation or whenever necessary
Spark plug
check X
replace whenever necessary
Recoil
starter rope
check X
replace whenever necessary
Fuel tank
check and
rell
X
Oil tank
check and
rell
before or after each use, or whenever necessary
Chain catcher
Replace a damaged or worn chain catcher (17) with a new one of the same type.
1. Loosen the bolt of the chain catcher (17) and remove it.
2. Fix a new chain catcher to the product.
Care and maintenance