10
TTHTP26
Getting Started . . .
Open ames in the work area, around the equipment and in the vicinity
of ammable materials are prohibited!
Do not smoke in the work area, around the equipment and in the vicinity
of ammable materials!
Risk of re/ammable materials.
Hot surface, do not touch! High temperatures on the equipment’s
surfaces and structural parts that could cause burns, if they are touched.
The equipment can also stay hot for a longer period of time after the
operation!
Petrol engines produce toxic carbon monoxide exhaust fumes. Breathing
carbon monoxide can cause nausea, fainting or even death. Do not
operate the engine indoors!
Stop the engine before refuelling. Never refuel the equipment while
the engine is running.
Only refuel unleaded petrol and oil mixture in ratio 40:1. Do not use
any other mixture ratio.
Stop the engine and disconnect the spark plug wire before assembly,
cleaning, adjustments, maintenance, storage and transportation.
Blades are sharp. Risk of cuts.
Keep ngers away from the moving cutting device.
Press the primer 6 times before starting the cold engine.
Choke – CLOSE position.
Choke – OPEN position.
Safety information
5059340124346-TTHTP26-GB-V01.indd 105059340124346-TTHTP26-GB-V01.indd 10 18/9/2020 9:55 AM18/9/2020 9:55 AM
To Next Page
Loading...
Need help?
General
