EN
24
In more detail...
TTI821GGT by TITAN
Product functions
Plant protector
Use the plant protector (12) to keep distance to obstacles that could be hit by the
cutting device.
WARNING! Adjust the plant protector position only when the product is
switched off and the cutting device is at a complete stop!
1. Pull the plant protector (12) out until it locks in place for trimming / edging
operation (Fig. 11).
12
Fig. 11, trimming / edging position
12
Fig. 12, storage position
2. Push the plant protector (12) in for transport and storage (Fig. 12).
To Next Page
Loading...
Need help?
General
