31
TTL758CHN
In
more
detail...
EN
Operation
1. Kickback may occur if the
nose or tip of the guide bar
touches an object, or if wood
pinches the saw chain in the
cut.
2. In some cases, contact with
the tip of the guide bar (4)
may cause a lightning-fast
reverse reaction, kicking the
guide bar up and back toward
the operator (Figs. 8a-8c).
1). Pinching the saw chain (3) along the bottom of the guide bar (4)
may pull the product forward away from the operator (Fig. 8d).
2). Pinching the saw chain (3) along the top of the guide bar (4) may
push the guide bar rapidly back toward the operator (Fig. 8e).
Fig. 8a
Fig. 8b
Fig. 8d
Fig. 8c
Fig. 8e
3). Any of these reactions may cause losing control of the product,
which could result in serious personal injury or even death.
4). With a basic understanding of ‘kickback’, the element of surprise
can be reduced or eliminated. Sudden surprise contributes to the
majority of accidents.
5). Keep a good rm grip on the product with both hands, the right
hand on the rear handle (15) and the left hand on the front
handle (1), when the motor is running. Maintain a rm grip with
To Next Page
Loading...
Need help?
General
