ENGLISH
ENGLISH
18
Pasos para una correcta programación:
09. TM63 LED / TM69 LED WATER SOFTENER START-UP
1. Program indicator
2. Minutes indicator
3. Seconds indicator
4. Days / gallons
5. Hours / m
3
6. Minutes / liters
7. Service
8. Backwash
9. Aspiration brine
10. Load brine
11. Fast rinse
12. Schedule
13. Block
14. Programming mode
15. Menu / confirmation
16. Manual regeneration
17. Down
18. Up
All valves are shipped with a standard configuration. However, you can adjust this schedule according to
the needs and water quality of the area.
TM69 LED valve programmation:
1. Unlock and access to programmation:
To unlock and enter the manual mode and program changes, press the UP and DOWN buttons simulta-
neously until the key icon desappears and appears the tool icon (setting mode).
2. Set the clock valve:
Press the button “Menu/confirm” twice, and use the buttons UP and DOWN to set the clock at the hour.
Press again the button “Menu/confirm” and you’ll be able to change the minutes. Finally, press “Menu/con-
firm” and the time will be set.
Button “UP”
Button “DOWN”
15
12
1 2 3
4
6
5
7
10 11
181716 19
1413
98
To Next Page
Loading...
Need help?
General