19
ENGLISH
ENGLISH
3. Set the type of regeneration:
Press the button DOWN to set the type of regeneration:
· A-01 = Delayed downflow volumetric regeneration
· A-02 = Regeneration instant volumetric downflow
To change it press the UP key, and confirm with the "menu / confirmation" key:
A-01 = delayed regeneration (regeneration will always be done at a preset time, once the volume of
water is exhausted).
A-02 = instantaneous regeneration (regeneration will be done upon reaching the predetermined water
volume, regardless of the time of day).
Button “UP”
Button “DOWN”
Button “MENU”
Button “MENU”
A-01 A-02
Button “UP”
Button “DOWN”
Button “MENU”
Button “MENU”
4. Setting the regeneration time:
This option is only editable if you have chosen a type of regeneration delayed in point 3 (A-01, A-03). Press
the DOWN key again to display the regeneration time.
Modify the time by pressing the "menu / confirmation" key, and then adjust it with the UP and DOWN keys.
Normally it will be left at 2:00 in the morning, which is the time at which it is preset. Press "menu / confirma-
tion" to confirm.
To Next Page
Loading...
Need help?
General