12. External signal mode:
Finally, pressing DOWN, the screen will show b-01 (external signal mode).
This option has two choice:
b-01: For connect an additional pump or electrovalve. Useful in installations with insufficient pressure or
with external by-pass management (it requires additionals components).
b-02: For connect an additional electrovalve to despresurize during the placement of the ceramics discs.
Useful in big equipments and high pressures. It requires additionals components.
Press “Menu/confirm” and use UP and DOWN to set the option desired. It’s preset in b-01.
Press “Menu/confirm” to confirm.
The process is finished, you must only press DOWN and the current time will be shown.
ENGLISH
ENGLISH
24
Button “MENU”
To Next Page
Loading...