www.tmgindustrial.com 22/35 Toll Free:1-877-761-2819
TROUBLESHOOTING
Abnormal sound or
abnormal
1. Loose blade bolt
2. Loose cutter bolts
3. Incorrect oil
4. Gear, bearing damage
5. Overload or soil hardness
is high
Tighten the bolts
Change Oil
Replace damaged Parts
Readjust tillage depth
uneven soil after tilling and
sowing
Adjusting plate position was
not coordinated well
Coordinate well the adjusting plate position
Blade axle not work or
rotate slowly
1. Parts installation errors
2.Excessive debris wrapped
on the blade axle
Check the blade axle installation
Clear debris
1.Not replace the deformed
blade
Replace the blades in time
1. No Oil
2. Overload angle is too large
Add lubrication
Proper use according to Manual
To Next Page