⚠ Danger
● Stay away from the machine during operation, or you will be injured.
● Operate abide the specified speed, or the PTO will be damaged and people will be injured.
● Do not carry people and luggage on the working machine.。
● Shift down before into the ramps. High-speed moving on the ramps will slip.
● Concentrate during operation.
● Stay away from the machine.
● Do not close to the bevel, the inclined plane operation will cause the tractor turn over, so slow down
the moving and operation speed.
● Cut off the PTO engine and stop the tractor when adjust the machine and remove the debris.
● Park the tractor on the flat field. Cut off the engine after the machine down to the ground.
⚠ Warning
Make sure to cut off the PTO and tractor
engine before cleaning.
⚠ Warning
Bad treatment, Inspection unit, repair
● Maintenance according to the operating
instruction, or the machine will be damaged.
● Working with the tractor on the flat and hard
field.
● Cut off the PTO engine and stop the tractor
when adjust the machine and remove the
debris.
● Make the rack and ancillary shoring before
drilling in.
● Repair and change the hydraulic joint and hose
in time in the condition of without pressure in
the original hose.
● The dismantle protective components in order
to treat bad, instruction unit and repair should
install back. Or they will be involved in the
machine and cause the accident.
⚠ Warning
● The problems of the machine will
not be found if regardless of the
inspection unit after operation.
Inspection unit carefully according
to the operating instruction.
● When using 3-point suspension to
raise the machine to do the
inspection, the machine will drop
without attention. Do the
inspection after locking the oil way
of the 3-point suspension.
www.tmgindustrial.com 6/35 Toll Free:1-877-761-2819
To Next Page