1. Three-point linkage
Connect tractor and rotary tiller
2. Support R&L
It can guide tilling direction and adjust tilling
depth as well as avoid blade touch ground
directly after operation finished.
3. R&L blade
To tilling
4. Blade axle
Drive blade to rotate.
5. Raker
To avoid blade touch ground directly and keep
machine level after operation finished.
6. Adjusting tie-plate
Connect three-point linkage and gearbox,
reduce machine vibration.
7. Gearbox
Change the output speed of the tractor and
transmit power to the blade axle.
8. Baffles
Crush and smooth land
To Next Page
Loading...