Need help?Do you have a question about the TMT Automation BOXER500E and is the answer not in the manual?
General| Brand | TMT Automation |
|---|---|
| Model | BOXER500E |
| Category | Gate Opener |
| Language | English |
Crucial safety instructions for qualified technicians regarding installation and operation.
Diagram illustrating the typical setup for the sliding gate opener.
Identification and overview of the main components of the gate opener.
Provides the physical measurements and size specifications of the unit.
Instructions for mounting the motor and attaching the gear rack to the gate.
Procedures to verify that the gate opener installation is correct.
Step-by-step guide to manually release the gate opener in case of power failure.
Details on wiring connections for the control board and accessories.
Process for adding or removing remote controls to the system.
Instructions for system auto-learning, factory reset, and understanding LED indicators.
Configuration options for gate opening, closing, speed, and safety features.
Specifications for BOXER500E and BOXER800E models, including motor and performance data.
Technical details for the H2 photocell safety sensor.
Specifications for the R1 radio transmitter.
Technical information for the FL2 flashing light accessory.
Detailed instructions for installing safety photocells, including wiring and alignment.
Instructions for installing the Green Box for power saving mode.
To Next Page
